How often should the GD70 air filter be checked?

The air filter element should be inspected weekly and cleaned or replaced if necessary. In dusty operating environments, the checklist recommends inspecting it more frequently.

How often should the oil be changed on a GD70?

The GD70 preventive maintenance checklist specifies a lubricant change every 3 months or 500 operating hours. It also specifies a lubricant change at the 12-month or 2,000-operating-hour interval.

Should a GD70 compressor be operated without an air filter?

No. The GD70 Preventive Maintenance Checklist specifically states not to operate the unit without the filter installed.

How do you check a GD70 for air leaks?

As part of the monthly maintenance schedule, the checklist calls for inspecting for air leaks using soapy water while the compressor is operating.

What should an operator check before using a GD70?

Before each operation, check the lubricant level, listen for unusual noise or vibration during operation, verify guards and covers are secure, and ensure the surrounding area is free of ice, rags, debris and flammable or explosive materials.

GD70 Preventive Maintenance Schedule & Checklist

Unexpected compressor issues can turn an otherwise routine delivery into lost time. For operators and fleet maintenance teams, the challenge is often not repairing a major failure. It is identifying the smaller maintenance issues that can develop into one.

A consistent preventive maintenance routine gives teams a repeatable way to inspect the GD70, address wear and operating changes early, and support reliable performance throughout its service life.

The Gardner Denver GD70 Preventive Maintenance Checklist organizes these tasks by daily, weekly, monthly and operating-hour intervals, giving operators and maintenance teams a practical reference to use in the field.

Download the Gardner Denver GD70 Preventive Maintenance Checklist

Small Maintenance Checks Can Help Prevent Bigger Problems

In liquid bulk transport, compressor reliability directly affects the ability to complete an offload. Conditions such as restricted airflow, air leaks, loose fasteners, improper lubricant levels or changes in drive components may not begin as major problems.

That is why preventive maintenance should not start when performance changes.

The GD70 checklist establishes recurring inspection points that help teams identify potential issues earlier while maintaining a consistent maintenance process across operators, vehicles and service intervals.

What Should Be Checked Before Operating a GD70?

Some of the most important inspections happen before the compressor begins working.

Before each operation, the checklist calls for checking the lubricant level and filling as needed. Operators should also listen for unusual noise or vibration during operation and verify that guards and covers remain securely in place.

The surrounding compressor area should be kept clear of ice, rags, debris and flammable or explosive materials.

These simple checks establish a baseline for the unit. When an operator knows what normal operation looks and sounds like, changes can be easier to recognize.

Keep Airflow Part of the Weekly Maintenance Routine

The GD70 air filter should be inspected weekly and cleaned or replaced when necessary.

For air filter service, the checklist instructs technicians to remove the wing nut securing the filter housing, remove the housing and filter element, and clean the element or replace it if it is damaged or excessively dirty. The filter is then reinstalled and the housing secured.

Operating environment matters too. Filters should be inspected more frequently in dusty conditions, and the GD70 should not be operated without the filter installed.

Monthly Inspections Go Beyond the Compressor Itself

Preventive maintenance should also account for the components and connections surrounding the GD70.

Every month, maintenance personnel should:

Inspect for air leaks using soapy water during operation
Check screws and bolts for tightness and tighten as required
Inspect drive components and adjust if necessary
Clean exterior surfaces

This broader inspection can help identify changes in the installation before they become more significant operating problems.

Make Preventive Maintenance Repeatable Across the Fleet

The value of a maintenance schedule is consistency.

For fleets operating multiple trucks, a defined daily, weekly, monthly and operating-hour schedule gives operators and maintenance personnel the same inspection framework. Instead of relying solely on an operator noticing a problem, maintenance becomes part of the normal operating routine.

The GD70 Preventive Maintenance Checklist puts those intervals into one field reference that teams can keep available when inspecting and servicing the compressor.

Keep Your GD70 Ready for the Next Offload

Preventive maintenance works best when it becomes routine. Giving operators and maintenance teams a defined inspection schedule can help identify developing issues earlier and support consistent GD70 operation in liquid bulk applications.

Use the Gardner Denver GD70 Preventive Maintenance Checklist as a field reference for recurring inspections, air filter service, lubricant changes and scheduled maintenance.

First Name *

Last Name *

Email Address *

Company *

Country

Your request will be forwarded to the relevant individuals to assist with your request.
By clicking 'Send' you are authorizing Gardner Denver to contact you so that we may fulfill your request, as well as to communicate with you regarding our products and services.
Terms and Conditions
Privacy Policy

(* required fields)

This site is protected by reCAPTCHA.

GD70 Preventive Maintenance FAQs

Different GD70 maintenance tasks have different intervals. Inspections are specified daily or before each operation, weekly and monthly. Lubricant changes are specified every 3 months or 500 operating hours, with lubricant changes and air filter replacement specified every 12 months or 2,000 operating hours.