- Lifetime warranty on all piping and fittings
- Leak free at 300 psi & 300°F
- Food-grade compliant
- Easiest installation/modification process
- Unmatched commitment to safety
- Quickest shipment of orders in the industry
- Zero maintenance
Compressed Air Piping and Fittings are a solid aluminum system that provides superior strength compared to other piping systems on the market. Our piping system is easy to install and delivers quality air, nitrogen, vacuum or inert gas that is equal to that of a high cost stainless steel system.
Our NeXt Generation of piping products offers an incredible rating of 300 PSI and 300°F across all the fittings in the product family. It is also meeting food grade regulations, and has a LIFETIME warranty covering all piping and fittings in the product series. Our USA production facilities will be providing expansive stock to our warehouses so that our Quick-Lock and Big-Lock product will be available when you need it.
Our NeXt Generation of piping products offers an incredible rating of 300 PSI and 300°F across all the fittings in the product family. It is also meeting food grade regulations, and has a LIFETIME warranty covering all piping and fittings in the product series. Our USA production facilities will be providing expansive stock to our warehouses so that our Quick-Lock and Big-Lock product will be available when you need it.
- Lightest product in the market
- Fastest installed system compared to all others available
- Structurally as strong as carbon steel
- One-tenth the weight of same diameter steel
- Tube and fittings manufactured from non-corrosive marine-grade aluminum
- Guaranteed highest quality air delivery
- Material construction and design allows highest flow rates and lowest pressure drops
- System flexibility means simple modifications and/or additions
- Lifetime leak-free guarantee
- Our piping is manufactured from 100% recyclable materials
Quick-Lock Marine Grade Aluminum
Component Part | Material | |
|---|---|---|
1 | Body | A380 Aluminum Powder Coated |
2 | Nut | A380 Aluminum Powder Coated |
3 | Plug | AISI 304 Stainless Steel (Optional, Ported, |
4 | Safety Ring | Polymer |
5 | Clamping Washer | AISI 304 Stainless Steel |
6 | Double O-Ring Seals | Buna N, High Nitrile Viton (Available Upon Request) |
Big-Lock Marine Grade Aluminum
Component Part | Material | |
|---|---|---|
1 | Body | A380 Aluminum Powder Coated |
2 | Seal | Buna N, High Nitrile Viton (Available Upon Request) |
3 | Bolts | Carriage / Grade 5 / Zinc Plated |
Component Technical Data
item | value |
|---|---|
Temperature | Minimum: -4°F (-20°C) Maximum: Viton 300°F (149°C) Maximum: Nitrile 176°F (80°C) |
Pressure | Minimum: -29.6 Hg (-0.99 bar) Maximum: 230 psi (15.8 bar) |
Fire Resistance | System does not stoke or propagate fires |
Compatibility | Compressed Air, Vacuum, Inert Gases |
Male Threads | National pipe thread ISO 228 |
Female Threads | National pipe thread ISO 228 |
Tubing Technical Data
item | value |
|---|---|
Pressure: psi/bar | 300/21 |
Thermal Conductivity at 77°F | 209 W/m-k -1450 BTU-in/hr |
Tubing Length | 16 ft |
Expansion Coefficient | 23.4 um/m-°C / 13 uin/in-°F |
Extruded Aluminum | Aluminum 6063/AA6063-T5 |
Heat Capacity | 0.9 J/g-°C / 0.215 BTU-in/hr-ft² |
Chemical Composition | Si: 0.2 - 0.6 - Mg: 0.45 ÷ 0.9 - Fe: 0.35 |
Ultimate Tensile Strength | 21.0 ksi / 21,000 psi |
Designations | AA 6063 Alloy |
Modulus of Elasticity | 68.9 GPa / 10,000 ksi |
Heat Treatment | Thermal Heat Treat “T5” |
Tensile Strength | 15.0 ksi min / 15,000 psi |
Surface Treatment | PPG Duracron Protective Coating |
Brinell Hardness | 60 ÷ 70 HB |
Density | 2.7 g/cc - 0.0975 in/in³ |
Melting Point | 615°C to 650°C / 1140 to 1210°F |
Electrical Resistivity at 68°F | 19 ohm-Cir. Mil/Foot |
Percentage Elongation | 8% |
Reach Out to Us