The CTS Eliminator II separates oil contamination from condensate before being expelled. The condensate becomes contaminated by the oil and must be treated before expelling it into a sewer system or onto the ground. The oil must be separated from the condensate and only the condensate can be expelled. The oil must be reclaimed and disposed of in an environmentally safe manner.
SIZE | DIMENSIONAL SYMBOL | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
A | B | C | D | E | F | G | H | J | K | L | M | N | P | Q | R | |
CTS15 | 29.75 | 27 | 20.75 | 11.25 | 5.25 | 16 | 0.75 | 26.5 | 26 | 9 | 14 | 19.5 | 4.5 | 2.75 | 4.5 | 4 |
CTS30 | 39 | 36.25 | 29.75 | 17 | 6.25 | 22.75 | 0.75 | 34 | 32 | 12.5 | 15 | 21 | 7.5 | 3.5 | 6.5 | 5.25 |
CTS60 | 39 | 36.25 | 29.75 | 17 | 5.25 | 23 | 1 | 35 | 32 | 22 | 26.5 | 30.75 | 6 | 3.5 | 13.5 | 5.25 |
CTS120 | 39 | 36.25 | 9.75 | 17 | 5.25 | 23 | 1 | 72 | 32 | 22 | 26.5 | 30.75 | 6 | 3.5 | 13.5 | 5.25 |
CTS180 | 39 | 36.25 | 29.75 | 17 | 5.25 | 23 | 1 | 19 | 32 | 22 | 26.5 | 30.75 | 6 | 3.5 | 13.5 | 5.25 |
CTS240 | 39 | 36.25 | 29.75 | 17 | 5.25 | 23 | 1 | 146 | 32 | 22 | 26.5 | 30.75 | 6 | 3.5 | 13.5 | 5.25 |
Note 1: All dimensions are in inches
Note 2: Tolerances - all dimensions are +/- .50 unless otherwise shown
Note 3: Diffuser is rotatable in 90 degree increments
Note 4: When properly maintained, the Eliminator II will have discharge water containing less than 15 ppm oil remaining
Model | CTS15 | CTS30 | CTS60 | CTS120 | CTS180 | CTS240 |
Weight in pounds | 53 | 77 | 120 | 240 | 360 | 480 |
Model | Max CFM Capacity | |
|---|---|---|
90° F & 90% RH | 70° F & 70% RH | |
CTS15 | 150 | 357 |
CTS30 | 300 | 714 |
CTS60 | 600 | 1428 |
CTS120 | 1200 | 2856 |
CTS180 | 1800 | 4284 |
CTS240 | 2400 | 5712 |
Ratings based on rotary screw air compressor operating on AEON 9000SP. Ratings may be increased by 25% if a refrigerated air dryer is not used. Please consult your Gardner Denver distributor for proper sizing when using other types of lubricants or compressors. Eliminator II is not recommended for use with emulsifying lubricant such as Polyglycol, ATF, or Motor Oil lubricants with heavy additive packages.