The TODO NGX Break-Away Coupling has been designed to eliminate spillage and damage associated with drive and/or pull away incidents when loading and unloading hazardous liquids. The coupler automatically senses an excessive load, closes the valves and then allows disconnection.
Designed to be installed on the same line as a TODO-MATIC® hose unit, the NGX BREAK-AWAY can handle the same demanding applications.
The NGX range now features market leading flow rate versus pressure drop for a BREAK-AWAY of similar design. It is also lighter than its predecessor and boasts far easier maintenance on-site.
Benefits:
High flow rate / low pressure drop
Encapsulated shear bolts
Operates independently of shut off safety systems and does not require an external power source
Will release at any angle of pull
Easy to re-set on site
Variants
The TODO NGX BREAK-AWAY is available in the following formats:
Sizes
2" (DN25), 3" (DN80), 4" (DN100), 6" (DN150)
End Connections
Threads:
BSP (according to ISO 228)
NPT (according to ANSI B1.20.1)
Others available upon request
Flanges:
PN10/16 (according to EN 1092-1)
PN25/40 (according to EN 1092-1)
ANSI Class 150 (according to ANSI B16.5)
ANSI Class 300 (according to ANSI B16.5)
TTMA
Others available upon request
Materials
Aluminium
Stainless Steel
O-ring Grades
The TODO NGX BREAK-AWAY can be purchased with an almost unlimited choice of O-ring grades to suit a wide range of applications, however the list below features our most commonly used:
Nitrile (NBR or Buna)
Viton (FKM)
EPDM
Kalrez (FFKM)
FMVQ
Chemraz (FFKM)
Note: Kalrez & Viton are Registered™ of DuPont, and Chemraz is a Registered™ of Greene Tweed
Specifications
Working Temperature Range: -20°C to +80°C (-4°F to +176°F)
Working Pressure:
Aluminium: 10 bar (145 psi)
2" & 3" Stainless Steel: 40 bar (580 psi)
4" Stainless Steel: 25 bar (363 psi)
6" Stainless Steel: 22 bar (319 psi)
Please note that working pressures are reduced for flanged products according to their individual pressure rating - for example: PN10/16 flanged products are reduced to 16 bar in stainless steel
TODO is committed to providing the highest quality products, and so the materials of construction of the NGX BREAK-AWAY is specifically selected for the best possible performance in the widest possible range of applications:
Aluminium: EN AW 6262 T6
Stainless Steel: 316L
Downloads
Product Catalogue
Generic Catalogue
Service Catalogue
How it works
TODO is part of Gardner Denver, Inc., a leading global manufacturer of highly-engineered, critical flow-control products, Gardner Denver is headquartered in Milwaukee, Wisconsin, USA and has facilities in more than 30 countries. To learn more about the company, visit