Gas Screw Compressor - HG24XXXVIEP
Back to the product list

HG24 Series Gas Screw Compressors

Model HG24XXX Gear Drive

LeROI provides rotary screw compressors for gas to the oil and natural gas, and industrial and process industries. Rotary screw gas compressors are very cost-effective for handling high volumes of gas in field gathering, vapor recovery, and a wide range of other applications.

The HG24 Series natural gas compressor is suitable for applications to 350 BHP (261.1 KW) and 300 PSIG (20.7 BARG) discharge pressure.

Low maintenance and high reliability are inherent with rotary screws when compressing natural gas because they have few moving parts. There are no valves, rings or packing to wear out or cause loss of efficiency.

Smooth operation results from no unbalanced forces and no pressure pulsation. No foundation is required. There are no piping vibrations from pressure pulsation.

Direct coupled natural gas engine or electric motor drives are equally acceptable with the HG24XXX rotary screw gas air compressor.

LeROI rotary screw gas compressors are available in 12 models covering a flow range of 20 (0.4 M3/min) to 15,000 MSCFD (300 M3/min) and horsepower from 10 (7.46 KW) to 800 (596.8 KW).

Single-Stage high pressure operation from 15 PSIG (1.03 BARG) to 300 PSIG (20.7 BARG) maximum is possible with the HG24 Series oil-flooded compressors. Compressor packages are therefore simple, reliable and inexpensive.

The gas differential pressure provides oil circulation for proper lubrication at differential pressures over 60 PSI (4.13 BAR). Optional oil pumps are available for applications with less than 60 PSI (4.13 BAR) differential pressure.

Adjustable Vi allows discharge porting to be selected in the field to match the internal compression to the application requirement for maximum compression efficiency.

All iron or steel construction with no copper or copper alloys makes these compressors compatible with natural gas, sweet or sour.

  • Brake HP - 350 Max.(261.1 KW)
  • Flow Range (MSCFD) - 5,000 Max. (100 M3/min)
  • Inlet Pressure
    • 20" Hg Vac. Min.* (508 mm/Hg)
    • 50 PSIG Max. (3.45 BARG)
  • Discharge Pressure
    • 20* (1.38 BARG)-300 PSIG (3.45 BARG) MAWP
  • Speed Range
    • 500 RPM Min.
    • 3,600 RPM Max.

*Consult Factory for use with low vacuum inlet or discharge pressures.

  • Rotor L/D: 1.65
  • Rotor Dia. 245 mm (9.64 inches)
  • Model HG24
  • Rotor Description: Twin Screw SRM Profile with Sealing Strips, 4 Lobe Male, 6 Lobe Female
  • Shaft Seal(s) – Mechanical*
  • Drive System:
    • Internal Helical Speed Increasing Gears (AGMA 11)
    • Gear Ratios of .717 - 2.617 are available
    • Rotation - Facing Shaft - CW
    • Drive Shaft 2-1/2” Dia. with 5/8” Square Key
  • Materials:
    • Rotors – Ductile Iron 65-45-12
    • Castings – Ductile Iron 65-45-12/Cast Iron G3000
    • Bearings – Roller bearings on the inlet end and tapered roller bearings on the discharge end – alloy steel races, rolling elements and cages.
  • Weight: 2,250 Lbs. (1,019 KG)
  • Versatrol Internal Bypass Valves: Versatrol internal bypass valves are available for efficient capacity control from 100-50% of design flow. Control can be manual with four steps or stepless with a microprocessor. Control system is not included.
  • Internal Volume Ratio: The HG24 has LeROI’s standard externally adjustable Vi feature, allowing internal compression optimization while the compressor is operating. Fixed Vi of H = 4.4, M = 3.0 and L = 1.9 are also available.
  • Oil Pump: Integral oil pumps are available for low-pressure differential applications.
  • SAE # 1 Flywheel Housing
  • SAE # 0 Flywheel Housing Adapter
  • Modules with gas/oil reservoir assembly, thermal valve, oil filter assembly, minimum pressure valve and sight glass are all mounted on a steel sub-base with connected components.
  • Gas Gathering
  • Well Head Gas Compression
  • Fuel Gas Boosting
  • Vapor Recovery
  • Inert Gas Boosting
  • Landfill Gas