Emco Wheaton DRY-BREAK couplers and DRY-BREAK adapters are designed for total safety.
Fluid cannot flow until the Emco Wheaton coupler has been locked into position on an Emco Wheaton Adapter and the valve opened. The coupler can only be disconnected from the adapter when the valve has been closed. Since product loss is thereby eliminated, possible hazards associated with leakage at disconnect are no longer a concern
DRY-BREAK couplers and adapters are rated for a working pressure of 85 psi (PN 6) and are available in sizes ranging from 1-inch up to 3-inch in diameter with a variety of body construction and seal materials available.
Specifications
Sizes Available:
Body Construction - Adapter:
Body Construction - Coupler:
Seal Materials Available:
J71 1-inch
Brass, Stainless
Aluminum, Brass nickel plated
Buna, Viton, Chemraz
J72 2-inch
Aluminum, Brass, Stainless
Aluminum, Stainless
Buna, Viton, Chemraz
J79 1.5inch inlet (mates with J72)
Aluminum
Aluminum
Buna, Viton, Chemraz
J73 3-inch
Aluminum, Brass
Aluminum
Buna, Viton, Chemraz, Low Temp Buna
ISO 7
Aluminum
Aluminum
Buna, Viton, Chemraz
Other material/seal options available, please contact customer service