The Gardner Denver "T Series" triplex bareshaft water jetting pumps have been in production for over 30 years and still going strong. You will find these reliable little pumps on the 100 Series Units. They are an ideal, economical "first pump" for most contractors.
The T-300SB for high-flow applications features the "L" fluid end design, which performs at pressures from 2,900 at 28.7 GPM to 5,700 PSI, at 56.2 GPM. It has soft seated inserted valves for durability and capacity to run “dirty” water. Valve locations are easily accessible and plungers are the quick change stile to change from 28 GPM to nearly 60 GPM in minutes.
T-300M for 15,000 PSI -The T-300M features the "L" fluid end design, which performs at pressures from 8,000 to 15,000 PSI, and flows from 10.3 to 18.4 GPM. Four different plunger sizes allow this pump to adapt to the specific flow and pressure requirements for each job. This pump is the standard for waterblasting. It covers the standard range of pressures and flows for a 100 HP pump. Overall maintenance and parts are inexpensive to maintain. Keep operating costs down with this Gardner Denver high-pressure waterjetting pump.
T-300H for 20,000 PSI - The T-300H inline fluid end reliably covers the pressure range from 15,000 to 20,000. Depending on the plunger set installed, the T-300H will deliver flows from 7.7 GPM to 10.3 GPM. All fluid cylinders and valve assemblies are autofrettaged for durability.
T-300UH for 40,000 PSI - The T-300UH inline fluid end reliably covers the pressure range to 40,000 and will deliver flows from 1.3 GPM to 3.75 GPM depending on the RPMs. All fluid cylinders and valve assemblies are autofrettaged for durability.