This product was designed to provide an energy efficient solution to remove moisture from compressed air. A highly engineered design has led to a minimal environmental footprint associated with this unit. Consuming under 50 watts, the energy efficient design of the desiccant air dryer offers one of the lowest costs of operation. When implemented into your application’s compressed oil-free air system, the benefits of a simplified designed are easily recognized.
The DHC Series heat of compression desiccant air dryers from Gardner Denver provide an energy efficient solution to remove moisture from compressed air. Thermal energy that is generated during the air compression process is utilized to regenerate the offline desiccant bed. Consuming under 50 watts, the energy efficient design offers the lowest cost of operation when compared to conventional dehydration technology. Ideally positioned for use with oil-free compressors, the DHC Series turns "waste heat" into energy savings that will directly impact the bottom-line.
350 - 10,000 SCFM
Maximum Operating Pressure: 150 PSIG
Maximum Inlet Temperature: 450°F
NEMA 4 Construction
Moisture separator removes bulk liquids up to 25,000 ppm/w and solids 3.0 micron and larger
High temperature after-filter removes solid particles 1.0 micron and larger
Equipped with redundant drain system
Minimal power required, providing low cost of operation and rapid return on investment
Fully packaged, skid mounted design that delivers ease of installation
Achieves low outlet pressure dew points without the use of purge air, blowers or booster heaters
Delivers ISO 8573.1: 2010 Air Quality 2 to 4 (-40°F to +37°F)