Oil Water Separators
Back to the product list

Oil/Water Separators

Efficient on-site disposal of compressed air condensate

Gardner Denver oil/water separators remove oil using three stages of treatment to separate difficult condensate generated by compressed air systems. Utilising a specially treated adsorbent, polypropylene media, the Gardner Denver Oil/Water Separators effectively separate all compressor lubricants. This eliminates the need for condensate storage tanks, settling chambers or costly disposal.

Save money and operate responsibly

Environmental regulations strictly prohibit the discharge of oily wastes and chemicals, including the condensate drained from a compressed air system. This mixture of oil and water is classified as hazardous industrial waste. The discharge of untreated compressor condensate into foul sewers is prohibited.

Compressor condensate must be either collected or treated priorto disposal. Using an oil/water separator to remove the oil from the condensate.
The compressor condensate consists of approximately 95% water. It makes financial sense to separate the oil from the condensate prior to the disposing of waste. Untreated condensate disposal is costly as it is charged by volume.

Every end-user that operates a compressed air system should have a (condensate) waste management program (ISO 14000) in place. This program is not only to abide by laws and regulations, but also to practice environmental and ecological responsibility. GDCSEP Oil/Water Separators are a reliable, efficient, cost effective and environmentally friendly solution.

Easy to install & maintain

• Flexible sizing options
• Suitable for all types of condensate drain
• No settling chamber or storage tank required
• Visual service indicator
• Light and easy element replacement
• Quick sectional draining through large 1" output