In this application, chlorine gas is recovered and compressed. Chlorine gas is lethal, toxic, and extremely corrosive therefore special consideration to the compressor material, seal liquid, and system configuration is required. Low-pressure chlorine gas applications using high concentration sulfuric acid can be handled by a standard nodular cast iron compressor. With lower operating temperatures and sulfuric acid as a seal liquid, there is little to no risk of rust occurring in the iron, making cast iron a more cost-effective choice than Hastelloy. Conversely, high-pressure applications require a compressor casing made from Austenitic Stainless Steel (316L or HC276 for certain applications), with ancillaries in the steel to cater for proper corrosion allowances. Our application specialists and engineers are experienced in the design of chlorine compressors & systems and can configure a solution to meet your process needs.
Suction Capacity: 60 to 13,000 ACFM (100 to 22,500 m3/h)
Vacuum Range: 1 inHgA (33 mbar abs.)
Suction Capacity: 1,150 to 18,900 ACFM (1,950 to 32,100 m3/h)
Vacuum Range: to 4 inHgA ( to135 mbar abs.)