2" x 2" Petroleum Pump
PETROLEUM 8

The Petroleum 8 self priming centrifugal pumps are capable of lifting liquids up to 25 feet above the original source. This petroleum pump comes readily available in three distinct models: PG, PO, and PE; each one being able to deal with different types of liquids. Applied in the agricultural, industrial, marine, and OEM industries, this petroleum pump was developed to run at maximum efficiency.

Request a Quote Request Service, Parts or Support

Description & Specifications

Petroleum 8 self-priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights up to 25 feet above the source. To handle many different fuels, the Petroleum 8 is available in three distinct models: PO, PG and PE 8.

A Petroleum 8 PumPAK® is a fully assembled and run tested pump end that can be easily coupled to a number of drivers such as hydraulic motors, 56C and 145TC frame motors and gas engines. A bearing pedestal is also available for T-frame motor or belt drive.

Standard features include SS drive sleeve, SS fasteners, renewable wear plate, and a semi-open dynamically balanced impeller.

The Petroleum 8 Pump is available in three distinct models: PG, PO and PE

Model PG Pumps – Compatible For Gasoline, Kerosene, Avgas & Jet Fuel

Model PO Pumps – Compatible For BioDiesel, Fuel Oil & Diesel

Specifications

SUCTION AND DISCHARGE

2" x 2" NPT

APPLICATION

Agricultural, Industrial, Marine, OEM

FLOW

Up to 150 GPM

HEAD FEET

UP to 100'

IMPELLER

PE- semi-open cast iron, 316 SS (optional), PG- 8- semi-open cast iron, aluminum (optional), PO 8- semi-open cast iron

MOTOR

Up to 3 HP

DRIVE OPTIONS

Close coupled 56C, Engine mount 5.5 HP, Engine mount 6.5 HP, Hydraulic motor .22 cu. in, Hydraulic motor .37 cu. in., Hydraulic motor .45 cu. in., Close coupled 145TC, Pedestal, PumPAK® (without motor)

COMPATIBLE FOR

PE 8 – ethanol, E 85, PG 8 – gasoline, avgas, kerosene, jet A/8, PO 8 – biodiesel, fuel oil, diesel

OPTIONS

5 blade impeller available for higher flows

MOUNTING OPTIONS

PE 8 – explosion proof, class 1, group D, PG 8 – explosion proof, class 1, group D, PO 8 – TEFC

FEATURES

Gas engine for diesel fuel transfer, Non-spark clamp (on some models), Renewable wear plate, Stainless steel drive sleeve, Stainless steel fasteners, Up to a 25' suction lift