Back to the product list

SAFETY PRESSURE TIGHT CAP

The TODO® Safety Pressure Tight Cap was designed in cooperation with the major European chemical companies and other interested parties.

The aim was to design a sealing cap system that would reduce pressure behind the cap if all other upstream closures had failed, thus protecting the operator from harm.

The cap system also alerts the operator to the existence of pressure behind the cap thus giving warning of potential upstream valve failure.

Request a Quote

Features

The TODO® Safety Pressure Tight Cap is certified as a full first or primary closure when used in combination with TODO-MATIC® or TODO-GAS® couplings.

The cap can also be custom sealed to prevent unauthorised operation.

There simply is no other coupling and cap system available with such a high level of passive safety features.

Variants

TODO Safety Pressure Tight Caps (PTC) are available in the following formats:

Sizes

2" (DN50), 3" (DN80), 4" (DN100)

Materials

Stainless Steel only

O-ring Grades

TODO Safety Pressure Tight Caps can be purchased with an almost unlimited choice of O-ring grades to suit a wide range of applications, however the list below features our most commonly used:

Nitrile (NBR or Buna)
Viton (FKM)
EPDM
Kalrez (FFKM)
FMVQ
Chemraz (FFKM)

Note: Kalrez & Viton are Registered™ of DuPont, and Chemraz is a Registered™ of Greene Tweed

Specifications

Working Temperature Range: -20°C to +80°C (-4°F to +176°F)

Working Pressure: 25 bar (363 psi)

TODO is committed to providing the highest quality products, and so the materials of construction of TODO Safety Pressure Tight Caps are specifically selected for the best possible performance in the widest possible range of applications:

Stainless Steel: 316L

{{recommendedRegLangFull}}

SAFETY PRESSURE TIGHT CAP

Features

Variants

Specifications

Downloads

Product Catalogue

Generic Catalogue

Service Catalogue