Current Region: Hong Kong China (EN)
Our Hydraulic Quick Release System E0790 is used for the automatic separation of a connected loading arm from a tank vehicle in the event of an accidental drive-away whilst still connected. In this event, there is minimal loss of pressure in the rest of the connected supply.
Our loading arms and the vapor return arms are provided with a quick release system with reduced diameter. The diameter of the system is designed to be 3¨ for the loading arm and 2¨ for the vapor return arm.
Our Quick Release System consists of two standard ball valves and the release coupling, which is clamped together by a collar assembly. With the use of a lever, first the ball valves are closed and then the collar release is activated. Due to the high operating force a hydraulic cylinder is required for the activation.
The system is controlled hydraulically according to the circuit diagram shown, i.e. with a hydraulic limit switch in the slew range between the F- and A-length of the arm.
The release will be initiated either by the product arm or the vapor arm, depending on which of them is outside of its safe working envelope first.
The hydraulic accumulator and the control system are located in a control cabinet with a conductive surface.