1-1/2" x 1-1/2" Self Priming Centrifugal Pump FLOMAX® 5

Click to enlarge

1-1/2" x 1-1/2" Self Priming Centrifugal Pump FLOMAX® 5 Flow Curve 2

Click to enlarge

1-1/2" x 1-1/2" Self Priming Centrifugal Pump FLOMAX® 5 Flow Curve 3

Click to enlarge

1-1/2" x 1-1/2" Self Priming Centrifugal Pump FLOMAX® 5 Curve 4

Click to enlarge

1-1/2" x 1-1/2" Self Priming Centrifugal Pump FLOMAX® 5 Drawing

Click to enlarge

1-1/2" x 1-1/2" Self Priming Centrifugal Pump FLOMAX® 5 Drawing 2

Click to enlarge

1-1/2" x 1-1/2" Self Priming Centrifugal Pump FLOMAX® Parts List

Click to enlarge

Back to the product list

1-1/2" x 1-1/2" Self Priming Pump
FLOMAX® 5

Readily available in aluminum, cast iron, or bronze, the FLOMAX® 5 self priming pump is capable of pumping highly toxic materials efficiently. This self priming centrifugal pump is utilized across the industrial, OEM, marine, and agricultural industries. 56C/145TC motors and gas engines can be close coupled to this centrifugal pump.

Request a Quote Request Service, Parts or Support

Description & Specifications

A FLOMAX® PumPAK® is a fully assembled and run tested pump end that can be easily coupled to a number of drivers such as hydraulic motors, 56C and 145TC frame motors and gas engines. A bearing pedestal is also available for T-frame motor or belt drive.

Standard features include stainless steel drive sleeve, stainless steel fasteners, renewable wear plate, and a semi-open dynamically balanced impeller.

The FLOMAX® series of pumps are commonly used in Industrial, OEM, Agricultural and Marine applications, such as: Bilge Pumps, Auxiliary Fire Pumps, Ballast Transfer Pumps, Washdown Pumps, Fertilizer and Pesticide Pumps, Applicators & Sprayers, Blending Pumps, Nurse Tanks, Bulk Transfer Pumps and much more.

Specifications

SUCTION AND DISCHARGE

1-1/2" x 1-1/2" NPT

APPLICATION

Agricultural, Industrial, Marine, OEM

MATERIALS OF CONSTRUCTION

Aluminum, Bronze, Cast iron

FLOW

Up to 145 GPM

HEAD FEET

UP to 100'

IMPELLER

5.0" max. diameter, semi-open

MOTOR

Up to 3 HP

DRIVE OPTIONS

Close coupled 56C, Engine mount 5.5 HP, Engine mount 6.5 HP, Close coupled 145TC, Pedestal, PumPAK® (without motor)

SEAL

Special seal material combinations available (consult factory), Standard carbon / ceramic / Viton

MAX SOLID SIZE

.56"

OPTIONS

5 blade impeller available for higher flows, Base plate shown above is optional, Double seal available for dry run applications, Hydraulic motor .22 cu. in., Hydraulic motor .37 cu. in., Hydraulic motor .45 cu. in., Stainless steel impeller

FEATURES

Renewable wear plate, Stainless steel drive sleeve, Stainless steel fasteners, Up to a 25' suction lift

Curves & Drawings

Parts Lists

Parts List

Parts List 21312

Downloads

FLOMAX INSTRUCTION BULLETIN

FLOMAX PUMPAK MOUNTING INSTRUCTIONS

Data Sheet

Type Approval

ABS Type Approval for the Flomax 5 and 8

{{recommendedRegLangFull}}