2" x 1" Hydraulic Chemical Pump
CHEMFLO® 7 HYDRAULIC

Available with a 1.16 or 1.59 cubic inch displacement SAE port, this hydraulic chemical pump fits gerotor type motors. 316 stainless steel is used to keep chemicals from corroding the internal components on this end suction centrifugal pump.

Request a Quote Request Service, Parts or Support

Description & Specifications

The ChemFlo® 7 hydraulic pumps utilize an enclosed impeller designed for achieving higher heads and efficiencies than a standard semi-open impeller. Multiple hydraulic flows allow the ChemFlo® 7 to meet most duty points up to 240 GPM and total head up to 340 feet. Several mechanical seal options are available in addition to the standard type 2100 carbon / ceramic / Viton mechanical seal.

ChemFlo® 7 hydraulic pumps are offered with 1.16 or 1.59 cubic inch displacement SAE port fitting gerotor type motors for hydraulic flows up to 28 GPM and a maximum pressure of 2000 PSI. Some hydraulic motors are bi-rotational.

Specifications

SUCTION AND DISCHARGE

2" x 1" 125# ANSI flange

APPLICATION

Agricultural, Commercial, Industrial, Marine, OEM

MATERIALS OF CONSTRUCTION

316 stainless steel

FLOW

Up to 240 GPM

HEAD FEET

Up to 330'

IMPELLER

8.0" enclosed, cast 316 SS

DRIVE OPTIONS

Hydraulic motor 1.16 cu. in., Hydraulic motor 1.59 cu. in.

SEAL

Special seal material combinations available (consult factory), Standard carbon / ceramic / Viton

HYDRAULIC FLUID FLOW

Up to 28 GPM

HYDRAULIC SYSTEM PRESSURE

Up to 2100 PSI

HYDRAULIC MOTOR

Gear

PSI

Up to 142

Curves & Drawings

Parts Lists

Parts List

Chemflo 7 w/1.16 disp hydraulic motor

Parts List

Chemflo 7 w/1.59 disp hydraulic motor

{{recommendedRegLangFull}}