LeROI provides rotary screw compressors for gas to the oil and natural gas, and industrial and process industries. Two-stage rotary screw natural gas compressors are very cost-effective for handling high volumes of gas in field gathering, vapor recovery, and a wide range other applications and delivering gas at high pressures.
The work is divided between two-stages and reduces the forces on rotating elements such as bearings. Low maintenance and high reliability are inherent with rotary screws when compressing natural gas because they have few moving parts. There are no valves, rings or packings to wear out or cause loss of efficiency. The two-stage LeROI screw compressor line offers the same capacity and power modulation features as the single-stage screw gas air compressors. Versatrol is an available option providing the end user with maximum flexibility.
Smooth operation results from no unbalanced forces and no pressure pulsation. No foundation is required. There are no piping vibrations from pressure pulsation. Direct coupled natural gas engine or electric motor drives are equally acceptable with the LGT24 and the LGT30 rotary screw. LeROI Rotary Screw Gas Compressors are available in 12 single-stage models covering a flow range of 20 (0.4 M3/min) to 15,000 MSCFD (300 M3/min) and horsepower from 10 (7.46 KW) to 800 (596.8 KW), and four two-stage models covering a flow of 1,000 MSCFD (19.62 M3/min) to 13,000 MSCFD (260 M3/min) and horsepower from 350 (261 KW) to 600 (447.42 KW).
*Consult Factory for use with low vacuum inlet or discharge pressures.
Two-stage operation from 40 PSIG (2.76 BARG) to 150 PSIG (10.34 BARG) maximum is possible with the LGT24 and LGT30 Series oil-flooded compressors. Compressor packages are therefore simple, reliable and inexpensive.The gas differential pressure provides oil circulation for proper lubrication. Optional oil pumps are available for applications requiring specific oil regulation. All iron or steel construction with no copper or copper alloys makes these compressors compatible with natural gas, sweet or sour.
Model LGT24 and LGT30
LGT24 245 mm (9.65 inches) first stage
175 mm (6.89 inches) second stage
LGT30 309 mm (12.17 inches) first stage
245 mm (9.65 inches) second stage
Rotor L/D 1.65
Rotor Description: Each Stage: Twin Screw SRM Profile with Sealing Strips, 4 Lobe Male, 6 Lobe Female
Shaft Seal(s) – Mechanical*
Internal Helical Speed Increasing Gears (AGMA 11)
LGT24 1.239-2.275 Gear Ratios available
LGT30 1.168-2.268 Gear Ratios available
Rotation - Facing Shaft - CW Drive Shaft
LGT24 2 7/8” Dia. With 3/4 Square Key
LGT30 2 7/8” Dia. With 3/4 Square Key
Rotors – Ductile Iron 65-45-12
Castings – Ductile Iron 65-45-12/Cast Iron G3000
Bearings – Roller bearings on the inlet end and tapered roller bearings on the discharge end – alloy steel races, rolling elements and cages.
Versatrol Internal Bypass Valves: Versatrol internal bypass valves are available for efficient capacity control from 100-50% of design flow. Control can be manual with four steps or stepless with a microprocessor. Control system is not included.
Oil Pump:Integral oil pumps are available for low-pressure differential applications.
Well Head Gas Compression
Fuel Gas Boosting
Inert Gas Boosting
1 / 2
2 / 2
LeROI is part of Gardner Denver, Inc., a leading global manufacturer of highly-engineered, critical flow-control products, Gardner Denver is headquartered in Milwaukee, Wisconsin, USA and has facilities in more than 30 countries. To learn more about the company, visit