Dry and Wet Chlorine Compression

GARO custom packaged solutions for the compression of chlorine offer reliable, low maintenance operations while safely handling chlorine gas

Our Products

Our Locations

Request Service, Parts or Support

{{helpSlideData.Component_Title}}

Chlorine Compression

Chlorine gas is used for large applications in the chemical & petrochemical industries. GARO compressors are used to compress either dry or wet chlorine in the production process.

Sulfuric acid is typically used as seal liquid in GARO compressors used in the dry gas application, to either complete the gas drying and the prevent corrosion of compressor parts eventually affected by moisture.

In the wet gas compression, water is used as liquid seals to ensure the process completion.

Check All Related Products

Benefits of Liquid Ring Compressors

The benefits of Liquid Ring Technology applied to chlorine gas compression are many:

Safety – The isothermal properties of the liquid ring allows Liquid Ring Compressors to operate at much lower temperatures than other technologies, lowering the risk of corrosion and damage
Reliability – With a single moving part, Liquid Ring Compressors exhibit less opportunity for failure and are able to handle occasional carryover of particles such as salt or organic materials
Affordability – Liquid Ring Compressors exhibit longer mean time between failure (MTBF) and a lower total cost of ownership (TCO) than competing technologies.

Case Studies & White Papers

DOWNLOAD THE CASE STUDY on dry chlorine

DOWNLOAD THE WHITE PAPER

DOWNLOAD THE CASE STUDY on wet chlorine

Dry Chlorine

The chlorine gas is produced by a process of electrolysis. After the cooling and drying stages, the gas enters the liquid ring compressor to begin the ‘chlorine compression and liquefaction process’.

At this process stage, it is essential to maintain a specific temperature of the gas at the compressor inlet to prevent corrosion and safety issues. The isothermal feature of Garo Liquid Ring Compressors allows the gas to maintain the right temperature and to run the process safely. Additionally, the ability of Garo compressors to run with different seal liquids, and specifically sulfuric acid, allows the process to be handled by steel or iron equipment.

Once compressed, the chlorine gas is then liquefied through cooling. The cooling process requires strict temperature and pressure controls in order to work effectively. Once again, GARO compressors play a key role in the process, by ensuring that the required discharge pressure is achieved prior to the chlorine being passed to the after-condenser for the condensation process.

Download the Whitepaper

Download the Case Study

Wet Chlorine

Liquid ring systems for wet chlorine applications are similar to those used for dry chlorine, with the exception of the materials used in the system and seal liquid. Water is used as seal liquid in wet chlorine processes. As a result, a wet chlorine process requires compressors constructed from titanium, to eliminate the risk of corrosion.

Download the Case Study

Key Features

Rugged Design Construction - tolerant of occasional carryover of salt
Low Maintenance Requirements
Simplified Process
Global Technical Support & Service

Low Pressure Vapor Recovery

GARO Single Stage Liquid Ring Compressor Package

Pressure: up to 5 Bar Abs
Flow rate: up to 5000 Am³/h per single compressor
Materials: Cast Iron or Stainless Steel; Titanium for Wet Cl₂; other materials upon request
Sealing type: mechanical seals in single arrangement; other arrangements upon request

High Pressure Vapor Recovery

GARO Two Stage Liquid Ring Compressor Package

Pressure: up to 12 Bar Abs
Flow rate: up to 3000 Am³/h per single compressor
Materials: Carbon Steel and Stainless Steel; Titanium for Wet Cl₂; other materials upon request
Sealing type: mechanical seals in single, back to back or tandem arrangement

{{recommendedRegLangFull}}

Chlorine Compression